August 6, 2023

Rogers AD250C PTFE Antenna Laminate

Rogers AD250C is an RF circuit laminate used in telecommunications infrastructure and antenna applications. Its material system combines PTFE with ceramic filler and glass reinforcement. The product is designed around low dielectric loss and controlled dielectric properties for printed RF circuitry.

Evaluate the laminate in the circuit

AD250C is one grade within the AD series. Its name should remain explicit on the material specification; changing to a nearby AD grade can change the electrical and mechanical assumptions used in the design. Compare the manufacturer’s process and design dielectric data using the stated test method and frequency.

For an antenna feed network, include the copper foil and finished conductor geometry in the loss assessment. A published material PIM value cannot by itself establish the PIM performance of connectors, joints and a complete antenna assembly.

Confirm PTFE processing

The Rogers AD fabrication guide calls for activation of drilled PTFE surfaces before conductive metallization. Review hole preparation, plating, bonding materials and dimensional tolerances with the selected fabricator instead of assuming a standard FR-4 process is sufficient.

For a useful manufacturing enquiry, provide the exact grade, dielectric thickness, copper weight, stackup, drill files and inspection requirements. Use the materials guide to compare options, or send the board requirements through the PCB quote form.

Official sources: Rogers AD250C product page; Rogers AD series fabrication guide.

Put this into production

Request a material, stackup and manufacturing review for your RF PCB project.

Get a Quote

Leave a technical comment

Your email address will not be published. Required fields are marked *