Project-specific manufacturing review

Get an RF PCB quote

Request a quotation for Rogers, Taconic, PTFE or hybrid RF boards. Send your material, quantity and electrical requirements; add Gerber files when ready. The review establishes a manufacturable stackup, an agreed inspection scope and a confirmed price and schedule.

A clear brief makes a better quotation

Use the form to share your name, email and project requirements. You can supply drawings after discussing the project. An early estimate can be reviewed against final fabrication data before an order is placed.

Confidential design? Request an NDA without attaching restricted information. Signing an NDA is a separate step; ticking the box does not create an agreement.

What to include

  • Board outline, dimensions, layer count and build quantity.
  • Exact laminate grade and core thickness, or your electrical targets if the grade is undecided.
  • Impedance targets, critical RF traces, loss budget and stackup drawing.
  • Finish, copper requirements, via structure and assembly scope.
  • Required inspections, reports, acceptance criteria and delivery destination.

What happens next

  1. Receipt: the form provides a reference after your request has been saved.
  2. Review: missing information, material availability and design constraints are clarified.
  3. Quotation: price, exclusions, test scope and lead time are confirmed for your project.

Review the material selection guide, impedance planning requirements and lead-time checklist while preparing your files.

Email [email protected]

For large files or an unusual CAD format, send a message first and request a suitable transfer method.

1. Add your design files
ZIP, RAR, 7Z, PDF or engineering document. Maximum 50 MB. You can request a quotation without uploading.

Need an NDA first? Send a message without restricted files and agree the NDA before uploading them.

2. Tell us what you need

Add stackup and manufacturing details

3. Where should we reply?

Only email is required. Your contact details and project information are used to handle this request. Do not include passwords, payment information or export-controlled files.

A reference number confirms the request was saved. Price, manufacturing scope and schedule are confirmed after review.

RF PCB quotation questions

Can I request a quote before the Gerber files are complete?

Yes. Supply dimensions, layers, material preference, quantity and operating frequency. Any early estimate depends on the assumptions stated in the response and must be reviewed against the released fabrication package.

Is the online calculator a binding price?

No. A calculator helps compare planning assumptions. Material procurement, panel use, yield, testing, finish and shipping require a project-specific review before the order price is confirmed.

Which files should be in the fabrication archive?

Include the copper, solder-mask and legend layers, board outline, drill files, fabrication drawing, stackup and impedance instructions. Label the revision clearly. Assembly requests also need a BOM, component placement data and assembly drawing.

Can I request an alternative laminate?

Yes. State the exact original grade and the electrical, thermal and mechanical limits. An alternative is a candidate for engineering validation, not an automatic equivalent. See the material cross-reference tool.

When does manufacturing lead time begin?

The start point depends on the agreed order conditions, availability and release of approved production data. Confirm the start date, working-day basis, inspection scope and transport separately; a requested rush date is not a manufacturing commitment.