Rogers R/bak SA 2500 is a firm cushioning tape for mounting flexographic printing plates. Rogers positions it for line and solid printing. The SA family’s documented construction uses urethane foam and acrylic adhesive; SA 2500 is a printing-mounting product rather than an aluminum-foil sealing tape.
Specify the printing requirements
Provide the artwork type, printing substrate, plate construction and press arrangement when selecting the tape. Confirm the required thickness and exact variant with the supplier before placing an order. Keep these details with the production job record.
Assess a proposed change through print trials using the intended mounting procedure and operating conditions. Evaluate solid-area coverage, line reproduction and consistency over the run. The material choice should be considered alongside the plate and press setup.
Use product-specific handling guidance
Follow the supplier’s mounting, storage and removal instructions for the selected R/bak construction. Do not transfer HVAC sealing, metal-foil shielding or building-use claims from unrelated tape products.
Use Rogers’ official resources to confirm the product and its purchasing channel. For a project involving an RF circuit-board laminate, the materials directory provides a separate starting point for substrate selection.
Official sources: Rogers R/bak product information; Rogers SA 2000 brochure.
Put this into production
Request a material, stackup and manufacturing review for your RF PCB project.