RF PCB Project Services

Start a new design with a reviewable package

For a new RF board, begin with the operating band, circuit purpose and sensitive features. The high-frequency PCB guide organizes the fabrication discussion. Send the available drawing and stackup even when some decisions remain open, clearly marking provisional items. A useful initial response identifies the construction questions that must be resolved before an order can be defined.

Resolve materials and bonding together

Use the material selection guide for candidate screening and the hybrid stackup guide when several dielectric systems are proposed. Name the baseline if the request concerns a substitution. Include foil, thickness and bonding assumptions so a quotation is based on an identifiable build, with any alternative kept visible for engineering approval.

Prepare a prototype around the uncertainty

The RF prototype resource is the route for an initial build intended to resolve a design or manufacturing question. Identify the structures the prototype must represent and the evidence expected from it. Quantity alone does not define a useful trial. Attach the operating conditions and decision criteria that will determine whether the design can proceed.

Separate fabrication from assembly requirements

For populated boards, continue to RF PCB assembly. Add the bill of materials, placement data, assembly drawing and component-sourcing responsibilities to the fabrication package. Identify special attachment or handling requirements for review. State whether the requested deliverable is a bare board, an assembled board or an assembly accompanied by a defined functional test.

Agree what the inspection report must answer

Visit quality and testing to organize inspection and report scope. Connectivity, dimensional inspection, impedance measurement and RF characterization answer different questions. Specify which evidence is required with the order and which testing will happen after assembly. The test-report guide helps connect methods, samples and reference planes to the actual acceptance requirement.

Make commercial comparisons use the same scope

Use the cost worksheet to record assumptions after defining the requested build. Two prices are difficult to compare when one includes special coupons or assembly and the other does not. Keep setup, testing and delivery basis visible. Request quantities separately where useful, and identify whether engineering changes or a repeat-order baseline affect the proposal.

Plan the schedule around required decisions

The lead-time planning guide helps organize the stages between file review and delivery. Provide a needed date with its commercial or project context, then request a confirmed schedule. Material sourcing, unresolved engineering questions, test scope and shipping arrangements can affect the plan. Treat an unconfirmed planning date as an open item rather than an accepted delivery commitment.

Send the request to the appropriate contact route

Use the quote form for files and a defined manufacturing request, or contact to explain a preliminary question. Include a clear owner for engineering approval and one controlled revision of the package. For repeat work, reference the previously accepted construction and identify changes. That gives the reviewer a practical starting point for the new scope.

Prepare a reviewable engineering request

Check only the requirements you have actually documented. This list records readiness; it does not inspect your files or certify a design. Missing information is useful: identify it explicitly so the engineering review can resolve it before a production release.

These inputs are processed in your browser and are not submitted by this tool. The downloaded summary is a plain-text planning record. Use the secure quote form to send files; request an NDA first if your project requires one.

Manufacturing context

RFPCB and PCBSync share the manufacturing facility shown below. These process photographs illustrate the production environment; they are not evidence that a particular board, material grade or RF performance has been qualified. Request the documentation and inspection scope applicable to your project.

Choosing the project service