Introduction to Rogers Corporation

Rogers Corporation is a leading manufacturer of high-performance printed circuit board (PCB) materials. Founded in 1832, Rogers has over 185 years of experience in material science and engineering. They provide a wide range of laminates, prepregs, substrates and other materials used for fabricating PCBs.

Some of their well-known PCB material brands include:

• Rogers RO4000 series – Glass reinforced hydrocarbon laminates
• Rogers RO3000 series – Ceramic filled PTFE composite laminates
• Rogers RT/duroid series – Ceramic filled PTFE composite laminates
• Rogers LO4000 series – Low loss laminates

Rogers PCB materials are known for their excellent electrical performance and reliability. They offer low dielectric loss, tight dielectric constant tolerance, low moisture absorption and superior high frequency signal integrity.

Rogers PCB Price List

Below are typical price ranges for some popular Rogers PCB materials:

Material	Description	Price Range (/sq.ft)
RO4003C	Standard FR-4, glass reinforced	$7 – $12
RO4350B	High frequency, glass reinforced	$16 – $30
RO4835	Mid-loss, glass reinforced	$45 – $60
RT/duroid 5870	High frequency, ceramic filled PTFE	$90 – $110
RT/duroid 6002	Ultra-low loss, ceramic filled PTFE	$160 – $220

• Prices vary based on order quantity, thickness, copper weight, and special requirements.
• Lead time is typically 4-6 weeks from order confirmation.
• Rush orders can be fulfilled in 2-3 weeks for an additional fee.
• Free testing coupons provided with each order.

Factors Affecting Rogers PCB Prices

Several factors impact the pricing for Rogers PCB materials:

• Material Type – More advanced dielectric materials cost more than standard FR-4 materials. For example, ceramic filled PTFE substrates have higher raw material costs.
• Volume – Higher order quantities receive discounted bulk pricing. Prototyping orders are more expensive.
• Copper Weight – Increasing copper thickness increases material costs. 1 oz copper is standard. 2 oz or 3 oz copper costs more.
• Special Requirements – Tight impedance control, controlled dielectric constant, lead-free compliance, and other special requirements add cost.
• Lead Time – Standard lead times allow for volume aggregation. Rush orders have extra fees.
• Certifications – UL, IPC, and DFAR certified materials require additional process controls adding cost.

Rogers PCB Quality

Rogers Corporation is certified to ISO 9001 and many of their facilities are AS9100 certified. Their PCB materials are qualified to IPC 4101 slash sheets.

All Rogers laminates are tested for:

• Dielectric constant (Dk)
• Dissipation factor (Df)
• Thermal expansion (TCE)
• Glass transition (Tg)
• Peel and bond strengths
• Flammability (UL 94V-0)

Coupon testing validates material properties. 100% electrical testing is performed. Rogers is committed to the highest quality standards for reliable, consistent PCB material performance.

Rogers and Quick Turn PCB Prototyping

For prototyping and short run production, Rogers works with a global network of qualified PCB manufacturers. By partnering with fabricators, Rogers ensures reliable access to their materials even for quick-turn orders.

Some capabilities provided by Rogers’ fabrication partners include:

• 24 to 48 hour turn times
• FastDFMTM design review
• Prototyping and small batch quantities
• Solder mask and silkscreen
• Completed circuit board assembly
• Testing and verification

This quick turn fabrication network enables engineers to rapidly iterate designs and test new product concepts using Rogers materials.

Frequently Asked Questions

What are the most commonly used Rogers materials?

The RO4350, RO4003, RT/duroid 5870, and RT/duroid 6002 laminates are very popular. RO4350 offers an excellent cost-performance ratio while RT/duroid 6002 provides ultra-low loss for high frequency designs.

Does Rogers offer high temperature PCB materials?

Yes, Rogers RO4000 and RT/duroid 6000 series materials perform well at elevated temperatures. Polyimide based Rogers XT/duroid laminates support extreme temperature PCB applications.

What are the standard copper weights offered by Rogers?

1⁄2 oz, 1 oz, 2 oz, and 3 oz ED copper foils are commonly used. 1 oz copper is standard while heavier copper is used for high current applications.

Does Rogers supply prepreg or just laminates?

Rogers supplies both laminates and prepregs. Prepregs are available with similar dielectric materials as their laminates. This ensures compatibility and bonding.

Can Rogers materials be ordered online?

Yes, Rogers works with distributors that sell their materials online in prototype quantities. Small orders can be purchased individually while production orders go through qualified PCB fabricators.