Rogers BISCO EC2265 is a solid silicone material filled with carbon black. Rogers identifies it for low-current conduction and electrostatic-discharge protection. It belongs to the BISCO silicone product range rather than a two-part epoxy adhesive system.
Specify the intended electrical function
Begin with the part’s role in the assembly: identify the contact surfaces, required electrical behavior and mechanical arrangement. Provide the material thickness, finished dimensions, operating environment and expected compression or loading to the supplier.
Electrical performance in an assembly should be evaluated with the actual contact geometry and mounting conditions. A material-property value alone does not establish the performance of a completed grounding or ESD-control design.
Use grade-specific documentation
Refer to Rogers’ EC2265 data sheet and BISCO handling guidance for the selected product form. Confirm any adhesive backing, converting requirements and installation method separately. Epoxy mixing ratios, potting instructions and resin-curing schedules are not an appropriate specification for this solid silicone grade.
Contact Rogers or the relevant material supplier for product configuration and current availability. If the assembly also requires a circuit-board substrate, use the RF PCB materials directory for that separate selection.
Official sources: Rogers BISCO EC2265 product information.
Put this into production
Request a material, stackup and manufacturing review for your RF PCB project.